Cassandra storage configuration is described by the conf/cassandra.yaml file. As the syntax evolves with releases, this wiki page tries to document those changes using [New in X.Y: ....] lines.

[New in 0.7: The configuration file format has changed to YAML]


[New in 0.5:

Turn on to make new [non-seed] nodes automatically migrate the right data to themselves. (If no InitialToken is specified, they will pick one such that they will get half the range of the most-loaded node.) If a node starts up without bootstrapping, it will mark itself bootstrapped so that you can't subsequently accidently bootstrap a node with data on it. (You can reset this by wiping your data and commitlog directories.)

Off by default so that new clusters and upgraders from 0.4 don't bootstrap immediately. You should turn this on when you start adding new nodes to a cluster that already has data on it. (If you are upgrading from 0.4, start your cluster with it off once before changing it to true. Otherwise, no data will be lost but you will incur a lot of unnecessary I/O before your cluster starts up.)

  auto_bootstrap: false


Cluster Name

The name of this cluster. This is mainly used to prevent machines in one logical cluster from joining another.


cluster_name: 'Test Cluster'


[New in 0.6:

Allows for pluggable authentication of users, which defines whether it is necessary to call the Thrift 'login' method, and which parameters are required to login. The default 'AllowAllAuthenticator' does not require users to call 'login': any user can perform any operation. The other built in option is 'SimpleAuthenticator', which requires users and passwords to be defined in property files, and for users to call login with a valid combo.


authenticator: org.apache.cassandra.auth.AllowAllAuthenticator



EndPointSnitch: Setting this to the class that implements IEndPointSnitch which will see if two endpoints are in the same data center or on the same rack. Out of the box, Cassandra provides org.apache.cassandra.locator.EndPointSnitch

endpoint_snitch: org.apache.cassandra.locator.SimpleSnitch

Note: this class will work on hosts' IPs only. There is no configuration parameter to tell Cassandra that a node is in rack R and in datacenter D. The current rules are based on the two methods: (see

Keyspaces and ColumnFamilies

Keyspaces and ColumnFamilies: A ColumnFamily is the Cassandra concept closest to a relational table. Keyspaces are separate groups of ColumnFamilies. Except in very unusual circumstances you will have one Keyspace per application.

There is an implicit keyspace named 'system' for Cassandra internals.

    - name: Keyspace1

[New in 0.6: ReplicaPlacementStrategy and ReplicationFactor became configurable per keyspace. Prior to that they were global settings.]

ReplicaPlacementStrategy and ReplicationFactor

Strategy: Setting this to the class that implements IReplicaPlacementStrategy will change the way the node picker works. Out of the box, Cassandra provides org.apache.cassandra.locator.RackUnawareStrategy and org.apache.cassandra.locator.RackAwareStrategy (place one replica in a different datacenter, and the others on different racks in the same one.)

replica_placement_strategy: org.apache.cassandra.locator.RackUnawareStrategy

Number of replicas of the data

replication_factor: 1


The CompareWith attribute tells Cassandra how to sort the columns for slicing operations. The default is BytesType, which is a straightforward lexical comparison of the bytes in each column. Other options are AsciiType, UTF8Type, LexicalUUIDType, TimeUUIDType, and LongType. You can also specify the fully-qualified class name to a class of your choice extending org.apache.cassandra.db.marshal.AbstractType.

(To get the closest approximation to 0.3-style supercolumns, you would use CompareWith=UTF8Type CompareSubcolumnsWith=LongType.)

If FlushPeriodInMinutes is configured and positive, it will be flushed to disk with that period whether it is dirty or not. This is intended for lightly-used columnfamilies so that they do not prevent commitlog segments from being purged.

[New in 0.5: An optional Comment attribute may be used to attach additional human-readable information about the column family to its definition. ]

        - name: Standard1
          compare_with: BytesType

        - name: Standard2
          compare_with: UTF8Type
          read_repair_chance: 0.1
          keys_cached: 100

        - name: StandardByUUID1
          compare_with: TimeUUIDType

        - name: Super1
          column_type: Super
          compare_with: BytesType
          compare_subcolumns_with: BytesType

        - name: Super2
          column_type: Super
          compare_subcolumns_with: UTF8Type
          preloadRowCache: true
          rows_cached: 10000
          keys_cached: 50
          comment: 'A column family with supercolumns, whose column and subcolumn names are UTF8 strings'


Partitioner: any IPartitioner may be used, including your own as long as it is on the classpath. Out of the box, Cassandra provides org.apache.cassandra.dht.RandomPartitioner, org.apache.cassandra.dht.OrderPreservingPartitioner, and org.apache.cassandra.dht.CollatingOrderPreservingPartitioner. (CollatingOPP colates according to EN,US rules, not naive byte ordering. Use this as an example if you need locale-aware collation.) Range queries require using an order-preserving partitioner.

Achtung! Changing this parameter requires wiping your data directories, since the partitioner can modify the !sstable on-disk format.


partitioner: org.apache.cassandra.dht.RandomPartitioner

If you are using an order-preserving partitioner and you know your key distribution, you can specify the token for this node to use. (Keys are sent to the node with the "closest" token, so distributing your tokens equally along the key distribution space will spread keys evenly across your cluster.) This setting is only checked the first time a node is started.

This can also be useful with RandomPartitioner to force equal spacing of tokens around the hash space, especially for clusters with a small number of nodes.


Cassandra uses MD5 hash internally to hash the keys to place on the ring in a RandomPartitioner. So it makes sense to divide the hash space equally by the number of machines available using InitialToken ie, If there are 10 machines, each will handle 1/10th of maximum hash value) and expect that the machines will get a reasonably equal load.

With OrderPreservingPartitioner the keys themselves are used to place on the ring. One of the potential drawback of this approach is that if rows are inserted with sequential keys, all the write load will go to the same node.


Directories: Specify where Cassandra should store different data on disk. Keep the data disks and the CommitLog disks separate for best performance. See also what kind of hardware should I use?

commitlog_directory: /var/lib/cassandra/commitlog
    - /var/lib/cassandra/data


Addresses of hosts that are deemed contact points. Cassandra nodes use this list of hosts to find each other and learn the topology of the ring. You must change this if you are running multiple nodes!


Never use a node's own address as a seed if you are bootstrapping it by setting AutoBootstrap to true.


Time to wait for a reply from other nodes before failing the command

rpc_timeout_in_ms: 5000

Size to allow commitlog to grow to before creating a new segment

commitlog_rotation_threshold_in_mb: 128

Local hosts and ports

Address to bind to and tell other nodes to connect to. You _must_ change this if you want multiple nodes to be able to communicate!

Leaving it blank leaves it up to InetAddress.getLocalHost(). This will always do the Right Thing *if* the node is properly configured (hostname, name resolution, etc), and the Right Thing is to use the address associated with the hostname (it might not be). The ControlPort setting is deprecated in 0.6 and can be safely removed from configuration.

listen_address: localhost
<!-- TCP port, for commands and data -->
storage_port: 7000

The address to bind the Thrift RPC service to. Unlike ListenAddress above, you *can* specify here if you want Thrift to listen on all interfaces.

Leaving this blank has the same effect it does for ListenAddress, (i.e. it will be based on the configured hostname of the node).

rpc_address: localhost
<!-- Thrift RPC port (the port clients connect to). -->
rpc_port: 9160

Whether or not to use a framed transport for Thrift. If this option is set to true then you must also use a framed transport on the client-side, (framed and non-framed transports are not compatible).

thrift_framed_transport: false

Memory, Disk, and Performance

Access mode. mmapped i/o is substantially faster, but only practical on a 64bit machine (which notably does not include EC2 "small" instances) or relatively small datasets. "auto", the safe choice, will enable mmapping on a 64bit JVM. Other values are "mmap", "mmap_index_only" (which may allow you to get part of the benefits of mmap on a 32bit machine by mmapping only index files) and "standard". (The buffer size settings that follow only apply to standard, non-mmapped i/o.)

disk_access_mode: auto

Buffer size to use when performing contiguous column slices. Increase this to the size of the column slices you typically perform. (Name-based queries are performed with a buffer size of !ColumnIndexSizeInKB.)

sliced_buffer_size_in_kb: 64

Buffer size to use when flushing !memtables to disk. (Only one !memtable is ever flushed at a time.) Increase (decrease) the index buffer size relative to the data buffer if you have few (many) columns per key. Bigger is only better _if_ your !memtables get large enough to use the space. (Check in your data directory after your app has been running long enough.)

flush_data_buffer_size_in_mb: 32
flush_index_buffer_size_in_mb: 8

Add column indexes to a row after its contents reach this size. Increase if your column values are large, or if you have a very large number of columns. The competing causes are, Cassandra has to deserialize this much of the row to read a single column, so you want it to be small - at least if you do many partial-row reads - but all the index data is read for each access, so you don't want to generate that wastefully either.

column_index_size_in_kb: 64

The maximum amount of data to store in memory per ColumnFamily before flushing to disk. Note: There is one memtable per column family, and this threshold is based solely on the amount of data stored, not actual heap memory usage (there is some overhead in indexing the columns). See also MemtableThresholds.

memtable_throughput_in_mb: 64

The maximum number of columns in millions to store in memory per ColumnFamily before flushing to disk. This is also a per-memtable setting. Use with MemtableSizeInMB to tune memory usage.

memtable_operations_in_millions: 0.3

[New in 0.5

The maximum time to leave a dirty memtable unflushed. (While any affected columnfamilies have unflushed data from a commit log segment, that segment cannot be deleted.) This needs to be large enough that it won't cause a flush storm of all your memtables flushing at once because none has hit the size or count thresholds yet. For production, a larger value such as 1440 is recommended.

memtable_flush_after_mins: 60


Unlike most systems, in Cassandra writes are faster than reads, so you can afford more of those in parallel. A good rule of thumb is 2 concurrent reads per processor core. Increase ConcurrentWrites to the number of clients writing at once if you enable CommitLogSync + CommitLogSyncDelay.

concurrent_reads: 8
concurrent_writes: 32

CommitLogSync may be either "periodic" or "batch." When in batch mode, Cassandra won't ack writes until the commit log has been fsynced to disk. It will wait up to CommitLogSyncBatchWindowInMS milliseconds for other writes, before performing the sync.

This is less necessary in Cassandra than in traditional databases since replication reduces the odds of losing data from a failure after writing the log entry but before it actually reaches the disk. So the other option is "timed," where writes may be acked immediately and the CommitLog is simply synced every CommitLogSyncPeriodInMS milliseconds.

commitlog_sync: periodic

Interval at which to perform syncs of the CommitLog in periodic mode. Usually the default of 1000ms is fine; increase it only if the CommitLog PendingTasks backlog in jmx shows that you are frequently scheduling a second sync while the first has not yet been processed.

commitlog_sync_period_in_ms: 1000

Delay (in milliseconds) during which additional commit log entries may be written before fsync in batch mode. This will increase latency slightly, but can vastly improve throughput where there are many writers. Set to zero to disable (each entry will be synced individually). Reasonable values range from a minimal 0.1 to 10 or even more if throughput matters more than latency.

# commitlog_sync_batch_window_in_ms: 1

Time to wait before garbage-collection deletion markers. Set this to a large enough value that you are confident that the deletion marker will be propagated to all replicas by the time this many seconds has elapsed, even in the face of hardware failures. The default value is ten days.

gc_grace_seconds: 864000

The threshold size in megabytes the binary memtable must grow to, before it's submitted for flushing to disk.

binary_memtable_throughput_in_mb: 256


StorageConfiguration_0.7 (last edited 2013-11-15 00:54:54 by 107)